3
ENGLISH
FRAN
Ç
AIS
DEUTSCH
NEDERLANDS
ESP
A
Ñ
OL
IT
ALIANO
POR
TUGU
Ê
S
SVENSKA
D
ANSK
OPERATION
TO PLAY AN ANALOG RECORD
1.
Set
INPUT SELECTOR
to
PHONO
.
2.
Play the record on the turntable.
3.
Use
VOLUME
to adjust volume, and
BASS
and
TREBLE
to ad-
just the tone.
NOTE:
•
Be sure the set
VOLUME
to is minimum setting before placing
the stylus onto the record or before replacing the turntable’s car-
tridge.
•
Never subject the turntable to shock or vibration while a record
is playing. This can cause the stylus to jump and possible
damage the record.
•
Locating your turntable too close to the speakers can cause howl-
ing, which will make it impossible to use higher volume settings.
•
Never turn off power while the stylus is in contact with the surface
of the record.
TO LISTEN TO AN FM/AM BROADCAST
1.
Set
INPUT SELECTOR
to
TUNER
.
2.
Tune in the desired station on the tuner.
3.
Use
VOLUME
to adjust volume, and
BASS
and
TREBLE
to ad-
just the tone.
TO PLAY A COMPACT DISC
1.
Set
INPUT SELECTOR
to
CD
.
2.
Play a CD on the CD player.
3.
Use
VOLUME
to adjust volume, and
BASS
and
TREBLE
to ad-
just the tone.
TO PLAY EQUIPMENT CONNECTED TO THE AUX 1 OR
AUX 2 JACKS
1.
Set
INPUT SELECTOR
to
AUX1
or
AUX2
.
2.
Set up the connected equipment for play.
3.
Use
VOLUME
to adjust volume, and
BASS
and
TREBLE
to ad-
just the tone.
Perform the applicable operation on the connected
equipment.
@3
CLASS A SWITCH
Press this switch while amplifier power is turned off to switch be-
tween Class A (25W, 8 ohms) and Class AB (95W, 8 ohms) amplifier
operation. The
CLASS A
indicator is lit while Class A
operation is
selected, and Class AB operation is indicated when the
CLASS A
indicator is not lit.
IMPORTANT:
The top cover may become hot during Class A operation, but this
does not indicate malfunction. Note, however, that you should never
place anything on top of this amplifier. Doing so can block ventila-
tion holes, resulting a build up of heat and malfunction of or dam-
age to the amplifier.
@4
SPEAKER SWITCHES 1/2
Use these switches to turn speaker output on (depressed) and off
(raised). You can turn off speaker output when listening to output
over headphones.
@5
PHONES JACK
Use the jack to plug in headphones that are equipped with a
standard phone jack.
@6
STANDBY INDICATOR
This indicator is lit while the amplifier is in the Standby Mode. Press-
ing the remote control unit’s
POWER
buttons switches the amplifier
between standby and power on.
INTEGRATED AMPLIFIER PM7200
INPUT SELECTOR
VOLUME
POWER ON/OFF
1
2
SPEAKERS
STANDBY
PHONES
OFF
REC SELECTOR
TAPE
PHONO
CD
TUNER
AUX1
AUX2
TAPE
CD-R/MD
CD-R/MD
MUTE
BASS
SOURCE
SOURCE DIRECT
OFF
ON
OFF
ON
+
-
R
L
+
-
CLASS A
OFF
ON
TREBLE
BALANCE
MAX
MIN
COPY
TAPE CD-R
CD-R TAPE
1
3
3
PM7200U(ENG)
03.12.17, 11:18 AM
Page 3
Adobe PageMaker 6.5J/PPC