Marantz PD4220, User Manual

Page: 44 / 52

E-38
Video Wall setting
Use this feature to configure a 2
×
2 or 3
×
3 video wall.
Set “ADVANCED OSM” to “ON” in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select “OPTION3”, then press
the MENU/ENTER button.
The “OPTION3” screen appears.
2. Use the
▲
and
▼
buttons to select “VIDEO WALL”,
then press the MENU/ENTER button.
The “VIDEO WALL” screen appears.
VIDEO WALL
EXIT
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
REPEAT TIMER
: 1
: SPLIT
: OFF
: OFF
: OFF
: OFF
SEL. RETURN ADJ.
3. Set the VIDEO WALL using
▲▼
and buttons.
See page E-38 to set DIVIDER.
See page E-38 to set POSITION.
See page E-39 to set DISP. MODE.
See page E-39 to set AUTO ID.
See page E-39 to set IMAGE ADJUST.
See page E-40 to set P. ON DELAY.
See page E-40 to set PLE LINK.
See page E-41 to set REPEAT TIMER.
4. Once the setting is completed...
Press the EXIT button to return to the OPTION3 menu.
Note:
A contingency method of shutting off the electric
power should be used in cases of emergency during video
wall setup.
Information
Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
DIVIDER
Set the 2
×
2 or 3
×
3 video wall.
Example: Setting “4”
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the
▲
and
▼
buttons to select “DIVIDER”.
4. Use the and buttons to select “4”.
The mode switches as follows each time the or
button is pressed:
→
OFF
↔
1
↔
4
↔
9
←
VIDEO WALL
EXIT
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
REPEAT TIMER
: 4
: SPLIT
: OFF
: OFF
: OFF
: OFF
SEL. RETURN ADJ.
Information
DIVIDER settings
OFF, 1 ....... 1 Screen (Matrix display function does not
work)
4 ................
4 Screens (2
×
2 video wall)
9 ................
9 Screens (3
×
3 video wall)
* When you select “4” or “9”, set the VIDEO WALL
POSITION.
VIDEO WALL POSITION
Set the position of each display.
Example: Setting “4”
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the
▲
and
▼
buttons to select “POSITION”, then
press the MENU/ENTER button.
The “VIDEO WALL POSITION” screen appears.
4. Use the and buttons to select “NO. 4”.
The mode switches as follows each time the or
button is pressed:
• 4 Screens
→
NO. 1
↔
NO. 2
↔
NO. 3
↔
NO. 4
←
• 9 Screens
→
NO. 7
↔
NO. 8
↔
.......
↔
NO. 14
↔
NO. 15
←
VIDEO WALL POSITION
POSITION NO. 4
EXIT RETURN ADJ.
Information
VIDEO WALL POSITION settings
1 Screen .....
There is no need to set POSITION.
4 Screens
9 Screens
NO. 1 NO. 2
NO. 4 NO. 3
NO. 7 NO. 8 NO. 9
NO. 10 NO. 11 NO. 12
NO. 13 NO. 14 NO. 15