E-30
INVERSE
Use this to set the inverse mode or to display a white
screen.
Example: Setting “INVERSE” to “WHITE”
Perform Steps 1-2 of LONG LIFE, then...
3. Use the
▲
and
▼
buttons to select “INVERSE”.
4. Use the
and
buttons to select “WHITE”.
The mode switches as follows each time the
or
button is pressed:
→
OFF
↔
ON
↔
WHITE
←
LONG LIFE
EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
: AUTO
: OFF
:
WHITE
: OFF
: OFF
SEL.
RETURN
ADJ.
Adjust the ORBITER function manually
Set the amount of shift and the time between movement.
Example: Setting so that the picture moves 2 dots
horizontally and 3 lines vertically every 3 minutes.
Perform Steps 1-3 of ORBITER, then...
4. Use the
and
buttons to select “MANUAL”, then
press the MENU/ENTER button.
THE “ORBITER” screen appears.
5. Adjust the items using the
▲▼
and
buttons.
The mode switches as follows each time the
or
button is pressed:
• H-DOT
→
1 DOT
↔
2 DOT
↔
.....
↔
19 DOT
↔
20 DOT
←
• V-LINE
→
1 LINE
↔
2 LINE
↔
.....
↔
19 LINE
↔
20 LINE
←
• TIME
→
1 M
↔
2 M
↔
3 M
↔
4 M
↔
5 M
←
ORBITER
EXIT
H-DOT
V-LINE
TIME
:
2 DOT
: 4 LINE
: 3 M
SEL.
RETURN
ADJ.
Information
ORBITER Function settings
H-DOT ..........
Moves from 1 to 20 dots in the
horizontal direction.
V-LINE ..........
Moves from 1 to 20 lines in the vertical
direction.
TIME ............
Interval of 1~5 minutes (1 horizontal
dot or 1 vertical line per interval).
Setting the time for INVERSE/WHITE
Set a time duration.
Example: Setting to that the INVERSE mode starts
in 2 hours and proceeds for one hour and a half.
Perform Steps 1-3 of INVERSE, then...
4. Use the
and
buttons to select “ON”, then press the
MENU/ENTER button.
THE “INVERSE/WHITE” screen appears.
5. Adjust the time using the
▲▼
and
buttons.
The mode switches as follows each time the
or
button is pressed:
• WORKING TIME
→
ON
↔
00H03M
↔
00H06M
↔
.....
↔
12H42M
↔
12H45M
←
• WAITING TIME
→
00H03M
↔
00H06M
↔
00H09M
↔
...
↔
12H42M
↔
12H45M
←
INVERSE/WHITE
EXIT
WORKING TIME
WAITING TIME
:
01H30M
: 02H00M
SEL.
RETURN
ADJ.
Information
Setting the time
WORKING TIME .....
Set the time duration for
“INVERSE/WHITE”.
When the WORKING TIME is set
to “ON” the mode will stay on.
WAITING TIME ......
Set the standby time until the
“INVERSE/WHITE” mode starts.
* The “WAITING TIME” can not be set when the
“WORKING TIME” is ON.
* THE “WORKING TIME” and “WAITING TIME” can
be set for up to 12 hours and 45 minutes in units of 3
minutes.
* Ending a WORKING TIME function, the monitor will
be STAND BY.
[Example]
WORKING TIME: 01H30M
WAITING TIME: 02H00M
Information
INVERSE Settings
ON .........
The picture is displayed alternately between
positive image and negative image.
You can set the time by pressing the MENU/
ENTER button while “ON” is set.
OFF .......
Inverse mode does not function.
WHITE ...
The entire screen turns white.
You can set the time by pressing the MENU/
ENTER button while “ON” is set.
←−−−−
2 H
−−−−→←−−
1.5 H
−−→←−−−−
Start
INVERSE/WHITE Start
STAND BY