Marantz NR1510, Service Manual

Page: 127 / 153

1.6. Confirmation items for the video system
See the block diagram fig.VXXth.
Paths to be confirmed Display Settings What to confirm
1 Analog Video pass fig.V01
V01:VIDEO PASS
Input Source : CBL/SAT • CVBS input ⇒ CVBS output
( b The input source can be switched to any source except CBL/SAT.)
2 HDMI pass
(MAIN ZONE)
fig.V02
V03:HDMI PASS
Input Source : CBL/SAT
MAIN ZONE ON
• HDMI input ⇒ HDMI output (MAIN)
(
b
The input source can be switched to any source except CBL/SAT.)
3 HDMI CEC fig.V03
V04:HDMI CEC
Input Source : CBL/SAT
HDMI Control : On
• When the power supply of a TV is put in the standby mode, make sure that the power supply
of this unit is also put in the standby mode.
(
b
The input source can be switched to any source except CBL/SAT.)
• The ARC path can also be checked (check this using the TV input source).
4 HDMI Audio
(Audio : AVR)
fig.V04a
fig.V04b
V05:H.AUDIO-AVR
Input Source : CBL/SAT
HDMI Control : Off
HDMI Audio : AVR (if checking the audio output from
AVR)
• HDMI input (PCM, DolbyDigital, DTS) ⇒ Speaker output.
• HDMI input(HD audio) ⇒ Speaker output.
(
b
The input source can be switched to any source except CBL/SAT.)
5 HDMI Audio
(Audio : TV)
fig.V05
V06:H.AUDIO-TV
HDMI Audio : TV (if checking the audio output from TV) • HDMI input (PCM, DolbyDigital, DTS) ⇒ HDMI output (audio output from connected TV)
(
b
The input source can be switched to any source except CBL/SAT.)
6 GUI fig.V06
V07:GUI MENU ON
Input Source : CBL/SAT
Setup Menu : On
• GUI display ⇒ HDMI output.
(
b
The input source can be switched to any source except CBL/SAT.)
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
127