Marantz NR1508 Service Manual Download

Page: 141 / 146

3.1. File structure on USB flash drive

DIGITAL PCB or network module is replaced onto the USB flash drive in the following structure.

After unzipping the files, store them in the root of the same USB flash drive.

Model Area

Download from SDI

ALL

avr_40.prod.update.factory.xxxx.zip

USB flash drive root

  + avr_40.prod.update.factory
    + xxxxxxzz.ota-download
    + heos_40.prod.update.factory

    xxxxxx :  Model name
    zz :      Region

3.2. Start the update.

NOTE :

• Remove the LAN cable from this unit when updating.

(Do not connect to a wired or wireless network.)

• The GUI menu setting details and image quality adjustment setting details are initialized when

Firmware Factory Restore is performed. Therefore, take a note of the setting details beforehand and

reconfigure the settings after update.

(1) Press the power button to turn on the power.

(2) Wait for this unit to start up.

(3) Set the input source to HEOS Music.

Check that the display is as shown below.

–TuneIn Internet Radio

No Network Connection

Content of the display is scrolled.

(4) Insert the USB flash drive into the USB port.

Download ﬁrmware

in USB ﬂash drive.

(5) USB Update starts automatically.

The Standby LED lights red.

Display during USB update

Please wait–––––

↓

Update–––**% **m

↓

Update Completed

It takes a maximum of approximately 25 minutes for update to complete.

(6) The unit restarts when update is complete.

When update is complete, the folder name on the USB flash drive changes to "

avr_40.prod.update.factory

done

". To use the files again, delete the "

.done

" part.

(7) Execute Firmware Factory Restore.

While holding down buttons "

STATUS

" and "

PURE DIRECT

" simultaneously, press the power button

to turn on the power.

Display during Firmware Factory Restore

Restoring FW...

↓

Restore––**% **m

↓

Completed

It takes approximately 15 minutes for Firmware Factory Restore to complete.

(8) Execute Service Region Settings.

See "

4. Update Method for Service Region Settings

(9) Check that the version is the specified version. See "

1. Version Display Mode

(10) If necessary, use OTA or the USB flash drive to update the firmware to the newest version.

We recommend using the firmware update method using OTA.

See "

5. Normal Firmware Update Method from USB Flash Drive

" or "

6. Normal Firmware Update

Method from OTA

---Cautions on Firmware Update---

• Do not remove the USB flash drive until updating is completed.

• Do not turn off the power until updating is completed.

It takes a maximum of approximately 25 minutes for update to complete.

Once an update is started, normal operations cannot be performed until it is completed.

3. Update method when the DIGITAL PCB or network module is replaced (Using a USB flash drive)

141

Caution in

servicing

Electrical

Mechanical

Repair Information

Updating

Summary of Contents for NR1508


















































































































































Search results

Summary of Contents for NR1508

Reviews:

Related manuals for NR1508

Brands by name

Popular brands

Marantz NR1508, Service Manual

Search results

Summary of Contents for NR1508

Reviews:

Related manuals for NR1508

Brands by name

Popular brands