Auto-Standby
When this unit is in the stop state and there is no input signal and
operation for 15 minutes, it automatically enters the standby mode.
On:
The unit goes into standby after 15 minutes.
Off
(Default)
:
The unit does not go into standby
automatically.
0
The auto standby function does not operate when the input source is “iPod” (direct
mode).
0
When iPod is being charged, this unit enters the power standby mode after
charging.
Firmware
Set whether or not to check for firmware update, update the firmware, and
display update, upgrade and alert notifications.
o
Update
0
In order to update the firmware, the environment and settings
required for connecting to broadband internet are needed.
(
v
p. 25)
0
Perform the firmware update operation after at least 2 minutes has
elapsed since turning this unit’s power on.
Check For Update:
Check for firmware updates.
Update Start:
Execute the update process. When the update
starts, the menu screen is shut down. During
the update, the progress is shown on the
display.
This unit automatically retries updating if updating fails.
Contents
Connections
Playback
Settings
Tips
Appendix
91
Front panel
Rear panel
Remote control
unit
Index
