background image

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK) 

NO USER-SERVICEABLE PARTS INSIDE 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol within an equilateral triangle is 
intended to alert the user to the presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of suffi cient magnitude to constitute 
a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the 
user to the presence of important operating and maintenance (servicing) 
instructions in the literature accompanying the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, 

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

 TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG 

TO WIDE SLOT, FULLY INSERT.

ATTENTION:

 POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA 

LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-
DANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

IMPORTANT SAFETY 

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

This product was designed and manufactured to 
meet strict quality and safety standards. 
There are, however, some installation and operation 
precautions which you should be particularly aware 
of.

  1.  Read these instructions.

  2.  Keep these instructions.

  3.  Heed all warnings.

  4.  Follow all instructions.

  5.  Do not use this apparatus near water.

  6.  Clean only with dry cloth.

  7.  Do not block any ventilation openings. 

Install in accordance with the manufacture's 
instructions.

  8.  Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 
apparatus (including amplifi ers) that produce 
heat.

  9.  Do not defeat the safety pur pose of the 

polarized or grounding-type plug. A polarized 
plug has two blades with one wider than the 
other. A grounding type plug has two blades 
and a third grounding prong. The wide blade 
or the third prong are provided for your safety. 
If the provided plug does not fit into your 
outlet, consult an electrician for replacement 
of the obsolete outlet.

 10.  Protect the power cord from being walked on 

or pinched particularly at plugs, convenience 
receptacles, and the point where they exit 
from the apparatus.

 11.  Only use attachments/accessories specifi ed 

by the manufacturer.

ES_070423U2

NOTE:

This equipment has been tested and found to 
comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against 
harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there 
is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

-  Reorient or relocate the receiving antenna.
-  Increase the separation between the equipment and 

receiver.

- Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV 

technician for help.

NOTE:

Changes or modifi cations may cause this unit to fail to 
comply with Part 15 of the FCC Rules and may void 
the user's authority to operate the equipment.

This Class B digital apparatus complies with Canadian 
ICES-003.

Cet appareil numérique de la Classe B est conforme à 
la norme NMB-003 du Canada.

 12.  Use only with the cart, stand, tripod, bracket, 

or table specified by the manufacturer, or 
sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

 13.  Unplug this apparatus during lightning storms 

or when unused for long periods of time.

 14.  Refer all ser vicing to qualified ser vice 

p e r s o n n e l .  S e r v i c i n g  i s  r e q u i r e d  w h e n 
the apparatus has been damaged in any 
way, such as power-supply cord or plug is 
damaged, liquid has been spilled or objects 
have fallen into the  apparatus, the apparatus 
has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

Additional Safety Information!

 • This product should not be placed in a built-in 

installation such as a bookcase or rack unless 
proper ventilation is provided or the manufacturer’
s instructions have been adhered to.

  •  Apparatus shall not be exposed to dripping 

or splashing and that no objects filled with 
liquids, such as vases, shall be placed on the 
apparatus.

  •  When the switch is in the OFF position, the 

apparatus isn’t completely switched-off from the 
MAINS.

  •  The equipment shall be installed near the 

Socket-Outlet and shall be easily accessible.

DECLARATION OF CONFORMITY

U.S. Responsible Party: Marantz America, Inc.

100 Corporate Drive,
Mahwah, NJ, 07430, U.S.A.
TEL: 630-741-0300

Type of Product:

Model:

Home Theater System

ES7001

This device complies with Part 15 of the FCC rules. 
Operation is subject to the following conditions: (1) This 
device may not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation. 

ES7001U DFU̲0̲cover.indd   IV

ES7001U DFU̲0̲cover.indd   IV

07.7.31   1:41:49 PM

07.7.31   1:41:49 PM

Summary of Contents for ES7001


























Reviews: