Marantz DV9500, User Manual

Page: 16 / 63

Getting Started 4
16
Playing discs
The basic playback controls for playing discs are
covered here. Further functions are detailed in the
next chapter.
Note
Throughout this manual, the term ‘DVD’ means DVD-
Video, DVD-Audio and DVD-R/RW. If a function is specific
to a particular kind of DVD disc, it is specified.
1 Switch the player on.
If you’re playing a DVD or Video CD, also turn on your TV
and make sure that it is set to the correct video input.
2 Press OPEN/CLOSE to open the disc tray.
3 Load a disc.
Load a disc with the label side facing up, using the disc
tray guide to align the disc (if you’re loading a double-
sided DVD disc, load it with the side you want to play face
down).
4 Playing a DVD automatically.
If you’re playing a DVD or Video CD, a menu may appear
(see
page 17 ).
Note
For one-sided, two-layer discs containing movies, etc.,
there may be a short image stoppage at the point where
the layers change. This is not a malfunction.
Basic playback controls
Button What it does
3
Starts playback.
DVD and Video CD: if the display shows
RESUME ,
playback starts from the resume point.
8
Pauses a disc that’s playing.
7
Stops playback.
DVD and Video CD: Display shows
RESUME . Press
7
(STOP) again to cancel the resume function.
1
1. Press for fast reverse scanning during play.
2. Press again to increase the scan speed. (Super
Audio CD and CD have 4 scan speeds; DVD and
Video CD have 7.) Press
3
(PLAY) to resume
normal playback.
¡
1. Press for fast forward scanning during play.
2. Press again to increase the scan speed. (Super
Audio CD and CD have 4 scan speeds; DVD and
Video CD have 7.) Press
3
(PLAY) to resume
normal playback.
4
Skips to the start of the current track or chapter,
then to previous tracks/chapters.
¢
Skips to the next track or chapter.
Important
While using the DVD playback controls, you may see the
mark displayed on-screen. The mark means that the
operation is not allowed by the player and disc.
POWER
PLAY
NEXT
PREV.
PAUSE STOP
OPEN/
CLOSE
FF
REW