DVD Setup Menu
6
30
Using the FL menu
The FL menu has been designed to set
“HDMI ON/OFF”
,
“HDMI RESET”
and
“
REMOT CODE
”.
The FL menu cannot be used if a disc is
playing.
It is recommended to set the FL menu
before loading a DVD.
If a DVD has been loaded, be sure to press
7
(STOP)
twice before proceeding.
(If “
RESUME
” is displayed in the FL display,
press
7
(STOP)
.)
Selecting the FL menu
Press
SETUP
for longer than 2 sec.
The
FL OFF
indicator on the player turns on and
off.
FL menu is displayed in the FL display.
Use the cursor buttons (
5
/
∞
) to select the FL
menu you want as follows.
(Example)
To exit the FL menu
When you have compleated setting up the FL menu
or if you want to exit the FL menu, press
SETUP
to
close the FL menu.
Press
ENTER
you want to set.
The menu selection is set.
Note
• If you want to use HDMI function, set the
HDMI
in the SETUP menu. (
page 37
)
HDMI RESET
Select
HDMI RESET
, then press
ENTER
.
"
SURE
" is displayed in the FL menu.
Press
ENTER
if you want to
RESET
.
The menu selection is set.
Note
• If images are not displayed properly on the TV
or projector after making HDMI setting on the
Setup menu, reset the set (see
page 47
). This
will return the HDMI setting to the state before
the setting was made.
HDMI ON/OFF setting
Select
HDMI ON/OFF
, then press
ENTER
.
Use the cursor buttons (
5
/
∞
) to select
ON
or
OFF
as follows.
(Example)
HDMI ON/OFF
HDMI RESET
REMOT CODE
Press
ENTER
you want to set.
The menu select is set.
• The DVD player support two remote control
codes: DVD 1 and DVD 2.
• Set the remote control code of the Remote
Control to the same setting.
• See
page 15
for more information.
REMOT CODE setting
Select
REMOT CODE
, then press
ENTER
.
Use the cursor buttons (
5
/
∞
) down to select the
type of
REMOT CODE
you want to set as follows.
(Example)
HDMI ON
HDMI OFF
* Factory setting
*
FL OFF
FL menu
DVD 1
DVD 2
* Factory setting
*
