Press oscillate again, the oscillate function turns off, and the indicator will turn off
7)
Press key to set the time
-
The time indicator
will be on, the LED light will flicker every 0.5
seconds. At this time, press the UP
+
and DOWN
-
keys to set the timer
(within a range of 1-12 hours), the time will be plus or minus 1 hour on every
press
-
If the timer has been set before, it cannot be changed. You can reset the time,
only by pressing the UP
+
and DOWN
-
keys. Press the key to
quit the timer setting. The time that you have set will begin at once
-
The LED indicator will decrease by 1 hour at a time, if the timer turns to 0, then
the device will turn off at once, and enter into standby mode.
-
Press the key when the timer setting is finished, this will now show the
current room temperature
9) Press key twice, the temperature indicator will alight
- After entering into the temperature setting, the temperature light will be on,
the LED light will flicker every 0.5 seconds. You can change the temperature
by pressing the UP
+
and DOWN
-
keys. The range of the temperature
is from 15°C to 28
°C, the temperature will be plus or minus 1°C on every
press
- After entering into the temperature setting, the temperature that has been set
cannot be changed. You can only reset the temperature by pressing the UP
+
and DOWN
-
keys. Press the key to quit the temperature setting,
and the temperature that you have set will begin at once
-
If no key has been pressed for 5 seconds or any key other than UP
+
and
DOWN
-) is pressed, then the LED indicator will show the room temperature.
If the temperature is
≤
-10°C, then it will show “LO”. If the temperature is over
40°C, then it will show “HI"
10) After the device has been switched on for 10 seconds, if the ambient temperature
is equal to or above the temperature that has been set, the heating function will
switch off. The low/high heating power light will switch off, and the fan will turn off
after 10 seconds. If you have pressed oscillate, this function will switch off as well.
11) If the ambient temperature decreases to 2°C below the set temperature, the
heating function will switch on again, as well as the fan & the oscillate function (if
you have pressed oscillate previously).
12) If the ambient temperature reaches above the automatically set temperature of
25°C, then the device will only work if a higher temperature has been set
13) When setting the time & temperature at the same time, a circle will alight. The time
and temperature will show intermittently every 30 minutes.
f
