Maplin A70QB Manual Download Page 2

Contents: 

 

1 x Blade heater 

 

1 x Base 

 

1 x Remote control 

 

4 x Screws 

 

1 x Instruction manual 

 

Technical specification:

 

Model NO. 

DF-HT5A01P 

Voltage 220-240V 

AC 

Frequency 50Hz 

Wind speed 

1.6m/s 

Power Low 

1600W/High 

2500W 

Noise level. 

50 dB 

Dimension 320 

1130 

mm 

 

Warning: 

 

Not suitable for use by children, keep out of reach unless under continuous 
supervision 

 

Do not place heavy objects on the power cord. Do not operate this appliance 
with a damaged cord or plug. If the power supply cord is damaged, it must be 

replaced by a qualified electrician 

 

Do not immerse the cord, plug or any part of this appliance in water or any 
other liquid. Do not handle with wet hands 

 

It is not recommended to use an extension cord with this product 

 

Do not let the mains lead hang over the edge of the table or work surface, 
touch hot surfaces or rest against the front of the heater 

 

Do not misuse the cord or pull the cable to disconnect from the power outlet 

 

In order to avoid overheating, do not cover the heater or place anything on top 
of it. Do not allow it to touch flammable material, including curtains, bedding etc 

 

The heater must not be located immediately below a socket-outlet 

 

Do not use this heater in dusty environments or where flammable or explosive 
vapours are present (e.g. in a workshop or garage), do not use in the immediate 

surroundings of a bath, shower or swimming pool 

 

Do not place this heater on or near to any other source of heat 

 

Do not hang wet clothes above the heater 

 

Ensure there is nothing obstructing the air inlet or outlet 

 

Some parts of this product can become very hot and cause burns. To avoid 
burns, do not touch the hot surface with bare skin. Particular attention has to 

be given where children, animals and vulnerable people are present 

 

This heater is not equipped with a device to control the room temperature 

Summary of Contents for A70QB








Reviews: