DOC-FW562-UM-R1.0
INSTALLATION MANUAL
© 2021. MAPLE ARMOR FIRE ALARM DEVICE CO., LTD.
8866, boulevard du Quartier, Brossard, Quebec, Canada, J4Y 0R2
All rights reserved. www.maplearmor.com
Page
1
of
5
FW562-A/B/C, FW562C-A/B/C TWO-WIRE DUCT DETECTOR
DESCRIPTION
The FW562-A/B/C and FW562C-A/B/C models are
ventilation duct detectors smart designed FOR USE
WITH MODEL FW511A DETECTOR HEADS. FW562-
A/B/C are UL-listed devices according to UL 268A,
and FW562C-A/B/C are ULC listed according to ULC-
S529 for fire protection systems. Equipped with a
photoelectric smoke detector, the units will signal
the presence of a dangerous amount of combustion
product in the ventilation system. They are
compatible with Maple Armor’s control panel model
FW106, FW106C, FW106S, FW106SC.
Note: These detectors are not designed to be used in
open areas.
ATTENTION
The products must be installed in accordance with
NFPA 72, CAN/ULC-S524, and/or Canadian
Electrical Code depending on the country of
installation. Check information of equipment
used in the system by other manufacturers for any
guidelines or restrictions.
The detector should never be installed in the following
locations: areas with excessive exhaust fumes, kitchen
areas, near fireplaces, furnace rooms, etc. Smoke
detectors are not to be used with detector guards
unless the combination has been evaluated and found
suitable for that purpose.
NOTE
Do not paint this device.
Any material extrapolated from this document or from
Maple Armor’s instructions or other documents
describing the product for use in promotional or
advertising claims, or for any other use, including a
description of the product’s application, operation,
installation, and testing is the sole responsibility of the
user. Maple Armor will not assume any liability for such
use. In no case will Maple Armor’s liability exceed the
purchase price paid for a product.
SPECIFICATION
Nominal Voltage
24V dc
SLC Voltage Range
17.6 to 28V dc
Standby Current
0.35 mA
Alarm Current
2 mA
Operating
Temperature
32°F to 100°F (0°C to 38°C)
Operating Humidity
0% to 93% RH
Dimension
329(W) x 114(H) x 51(D) mm
(13 1/8 x 4 x 2) in.
Weight (with base)
4.6 oz (132 g)
Mounting location
Side and top
SPECIFICATIONS
Duct Detector models
a.
Applicable to ULC listing required area
Model
Air Velocity
Contents
FW562C-A
2000 to 4000 FPM
(ft/min)
10.2 to 20.3 (m/s)
⚫
Duct detector assembly
⚫
One exhaust tube
⚫
One detector headcover
⚫
One
φ
5 * 2 hole sampling
tube (order separately)
FW562C-B
700 to 2000 FPM
(ft/min)
3.6 to 10.2 (m/s)
⚫
Duct detector assembly
⚫
One exhaust tube
⚫
One detector headcover
⚫
One
φ
5 * 4 hole sampling
tube (order separately)
FW562C-C
300 to 700 FPM
(ft/min)
1.5 to 3.6 (m/s)
⚫
Duct detector assembly
⚫
One exhaust tube
⚫
One
φ
5 * 4 hole sampling
tube (order separately)
b.
Applicable to UL listing required area
Model
Air Velocity
Contents
FW562-A
2000 to 4000 ft/min
10.2 to 20.3 (m/s)
⚫
Duct detector assembly
⚫
One exhaust tube
⚫
One detector headcover
⚫
One
φ
5 * 4 hole sampling
tube (order separately)
FW562-B
1000 to 2000 ft/min
5.1 to 10.2 (m/s)
⚫
Duct detector assembly
⚫
One exhaust tube
⚫
One
φ
5 * 4 hole sampling
tube (order separately)
FW562-C
300 to 1000 ft/min
1.5 to 5.2 (m/s)
⚫
Duct detector assembly
⚫
One exhaust tube
⚫
One detector head baffle
⚫
One
φ
5 * 2 hole sampling
tube (order separately)
