14
DTCXSL02EN - v2
10 - TECHNICAL SERVICE MENU
10.1 - MENU NAVIGATION
- To enter the Technical Service functions:
Press the left button repeatedly, while holding
the right button pressed, until you read
message MENU ST on the display.
- Navigate through the different submenus:
To navigate through the different menu
options, press the left and right buttons.
- To validate selection and set-up changes:
Press the central button to validate the set-up
changes and to validate the selection of an
option or submenu.
- To exit a menu or submenu:
Select the option EXIT and press the central
button to exit the current menu or submenu
and go to the main screen or the menu
immediately above.
NAVIGATION MAP:
MENÚ ST
OPENING SPEED
CLOSING SPEED
CLOSING FORCE
HOLD OPEN TIME
CLOS COUNTDOWN
INS RADAR SENS
OUT RADAR SENS
LANGUAGE
RED OPENING ADJUST
SELF ADJUSTMENT
SELECTOR VERSION
DOOR VERSION
RESET USR PIN
10.2 - OPTIONS AVAILABLE THROUGH
THE TECHNICAL SERVICE MENU
OPENING SPEED
Adjusts the opening speed of each leaf
Value:
400 to 1000 mm/s.
CLOSING SPEED
Adjusts the closing speed of each leaf
Value:
150 to 600 mm/s.
CLOSING FORCE
Adjusts the closing forcé of each leaf
Value:
40 to 140N.
HOLD OPEN TIME
Adjusts the time the door leaves will stay open after they
reach the open position, to later close again.
Value:
0 to 9,9 sec.
CLOS COUNTDOWN
Adjusts the timer that will keep the lock unblocked before
changing to block mode, after selecting door CLOSE.
Value:
0 to 99,9 sec.
INS RADAR SENS
Adjusts the sensitivity of the interior radar.
Value:
1 a 25
OUT RADAR SENS
Adjusts the sensitivity of the exterior radar.
Value:
1 to 25
LANGUAGE
To may choose one of the following languages: Catalan,
Spanish, English and French.
Select the language using the left and right buttons, and
press the central button to confirm your selection. Go to
EXIT to save the new value.
RED OPENING ADJUST
This parameter adjusts the máx. opening stroke of each
door leaf, when the door is in “Reduced opening” mode.
The max. and min. values depend on the actual clear
opening of the door.
SELF ADJUSTMENT
Use this parameter to run the self-adjustment after
installing the door.
Press the central button once until “RUN SELF-
ADJUSTMENT” is shown on the display, and press a
second time to run the self-learning process.
Select EXIT and press the central button to leave the
menú.
SELECTOR VERSION
Displays the software versión inside the selector.
DOOR VERSION
Displays the software versión in the door’s main board.
RESET USR PIN
Reset the user PIN to the factory value (1111) pressing the
central button, until message “PIN RESET” is shown on the
display. Press the left or right buttons to EXIT this menú.
