Manttra 34111, Instruction Manual

Page: 15 / 41

14
ZPD by pulling it from inside the lid. Insert the new
ZPD by pushing it firmly from inside the lid. Now
ensure that the ZPD floats freely. Refix the regulator.
b) The cooker comes with lid, body and back handles.
In case you want to fix spare handles: To remove
the body handle , unscrew the handle screw under
neath the handle. Align the new handle, insert the
screw and fasten tightly.
To remove the lid handle:
• Remove the Gasket.
• Unscrew the vent tube nut and remove the vent
tube. The hold down cup will come away along with
the vent tube.
• Unscrew the lid handle screws from inside the lid.
Make sure, the square nuts inside the lid handle, do
not fall, while removing the handle.
Now to refix the handle:
• Align the handle with the square nuts in place and
tighten the screws firmly from inside the lid.
• Place the hold down cup in position, and refix the
vent tube by tightening the vent tube nut firmly.
To remove the back handle ,unscrew the handle screw
and take out the handle from the bracket. Align the
new handle with the bracket , insert the screw and
fasten tightly.