Mantracourt Electronics Limited
T24-SAf Fast Strain Gauge Acquisition Module User Manual
3
Configuration
This section explains how to install software and configure the module. Please note that you will need the T24
Toolkit software and a T24-BS base station to allow your computer to communicate with T24 telemetry
devices.
Calibration
Please Note: The calibration feature is not available for the T24-SAf.
Installation
T24 Toolkit
To configure the devices we must use the
T24 Toolkit
software application. This can be downloaded from our
web site or may be shipped with your products.
Install this on a PC or laptop.
Run setup.exe and follow the prompts to install the software.
T24-BSu Base Station
If you have a USB version of the base station (T24-BSu) then you just need to plug this into a USB socket on your
PC. If you are using an alternative base station then please refer to the appropriate manual.
