6
The
Data Rate
tab can be used to change the transmit interval (how
often data is sent) and the average sample period (the period over which
that data is gathered). If set to zero it will just show the average since last
transmission. The transmit interval is factory set to 1000 ms and the
average sample period is factory set to 10 seconds.
There is also an option of the WSS sending the gust value on the data
tag of the WSS +1.
Please note: the T24-DWS will only accept either, average or gust, not
both at the same time – see page 2.
The setpoint will operate from the selected value; either
Average
or
Gust
.
