background image

Mantracourt Electronics Limited

  LC1 User Manual 

Note 1: Derived from Host Instrument 

Note 2: Excluding load cell excitation current 

‘(*display only)’ denotes that the specification applies to the on-board display only, not the Host instrument. 

CE Approvals 

European EMC Directive  2014/30/EU 

BS EN 61326-1:2013 
BS EN 61326-2-3:2013 

Wiring Conditions 

Load Cell and Host cable connections should use individually screened twisted multi-pair cables (e.g. Farnell 
118-2117)
Terminate all screens at ‘SCR’. SCR should be connected to a good Earth. The earth connection should be of
sufficient cross sectional area to ensure a low impedance to attenuate RF interference.

Warranty 

All LCI products from Mantracourt Electronics Ltd., ('Mantracourt') are warranted against defective material 
and workmanship for a period of three (3) years from the date of dispatch. 
If the 'Mantracourt' product you purchase appears to have a defect in material or workmanship or fails 
during normal use within the period, please contact your Distributor, who will assist you in resolving the 
problem. If it is necessary to return the product to 'Mantracourt' please include a note stating name, 
company, address, phone number and a detailed description of the problem. Also, please indicate if it is a 
warranty repair. 
The sender is responsible for shipping charges, freight insurance and proper packaging to prevent breakage 
in transit. 

'Mantracourt' warranty does not apply to defects resulting from action of the buyer such as mishandling, 
improper interfacing, operation outside of design limits, improper repair or unauthorised modification. 
No other warranties are expressed or implied. 'Mantracourt' specifically disclaims any implied warranties of 
merchantability or fitness for a specific purpose. The remedies outlined above are the buyer’s only 
remedies. 'Mantracourt' will not be liable for direct, indirect, special, incidental or consequential damages 
whether based on the contract, tort or other legal theory. 

Any corrective maintenance required after the warranty period should be performed by 'Mantracourt' 
approved personnel only. 

In the interests of continued product development, Mantracourt Electronics Limited reserves the right to 
alter product specifications without prior notice. 

Summary of Contents for LCI











Reviews: