Mantracourt DCell, User Manual

Page: 54 / 73

Mantracourt Electronics Limited DCell & DSC MantraCAN User Manual
53
Chapter 9 Software Command Reference
This chapter contains tables of all DCell/DSC commands, with brief details of each.
Commands in Access Order
Name Description Access Command Number
CMVV Temp Compensated mV/V RO 5
STAT Status RO 6
MVV Filtered & factory calibrated mV/V RO 8
SOUT Selected output (copy of SYS) RO 9
SYS Main output RO 10
TEMP Temperature RO 11
SRAW Raw System output RO 12
CELL Cell output RO 13
FLAG Error flags RW 14
CRAW Raw cell output RO 15
ELEC Electrical output RO 16
SZ System zero RW 22
SYSN Snapshot result RO 23
PEAK Peak value RO 24
TROF Trough value RO 25
CFCT Communications failure count RW 26
VER Software version RO 30
SERL Serial number low RO 31
SERH Serial number high RO 32
RATE Reading rate select RW 36
NMVV Nominal mV/V for scaling ELEC RW 39
CGAI Cell gain RW 40
COFS Cell offset RW 41
CMIN Cell range min RW 44
CMAX Cell range max RW 45
CLN Number of Linearisation points RW 50
CLX1..7 Linearisation raw-values RW 51..57
CLK1..7 Linearisation corrections RW 61..67
SGAI System gain RW 70
SOFS System offset RW 71
SMIN System range min RW 74
SMAX System range max RW 75
USR1..9 User storage values RW 81..89
FFLV Dynamic Filter Level RW 92
FFST Dynamic filter steps RW 93
RST Reset X 100
SNAP Take snapshot X 103
RSPT Reset peak & trough X 104
SCON Shunt cal ON X 105
SCOF Shunt cal OFF X 106
OPON Digital Output on X 107
OPOF Digital output off X 108
CTN Number of Temperature Compensation points RW 110
CT1..5 Temperature Compensation Point RW 111..115
CTG1..5 Temperature Compensation Gain adjust RW 116..120
CTO1..5 Temperature Compensation Offset Adjust RW 121..125
STRMON Start Data Streaming X 128
STRMOFF Stop Streaming Data X 129