Applied Measurements Limited
B24 Telemetry User Manual
32
Source Units
This will display the engineering units that have been determined from the
transmitters referenced by the expression. As long as there is just a single
transmitter, or all transmitters share the same unit type, then this will show the
engineering unit here. If the engineering units cannot be determined by the
expression you entered, or you just want to override it, you can enter your own text
instead.
Working Units
When the Units (Entered above) are recognised then on tapping this section you
will be presented with a list of engineering units that the displayed value can be
automatically converted to. See
If the Units are not recognised you get the option of choosing your custom text to
display.
In all cases you can choose to display no units by selecting None.
Output
Select either Actual Value, Maximum Value or Minimum Value. The maximum and
minimum are only recorded during the lifespan of the displayed dashboard and can
be reset by a long press on the tile if the correct action has been selected below.
Numeric Format
Select the format for the displayed data. There are options available for different
combinations of integer and decimal digits. Note that if the integer numeric value
will not fit into the requested format then the value will be displayed.
Action
Select the action to execute when you tap and long hold the tile.
None – No action occurs.
Individual Sources – This effectively zeroes the values of all transmitters
referenced in the expression in this tile. If the transmitters are used in the
expressions of any other tiles then those will be affected as well. (This does not zero
the actual value transmitted by the module)
Tile Only – Zero the current tile display only.
Reset Min/Max – If the tile action is to capture minimum or maximum then this
option will reset the captured value back to the current value.