18
9. Bringing into service
Before bringing into service this product, check you can move the doors manually effortless. A bad
installation with a bad doors alignment or high frictions can damage the motors. Check that the
product and accessories are correctly connected.
This product is equipped with a stoppers learning push button (BP Prog) which determines the
movement of each door.
The motor won’t work as the stoppers learning has not been carried out.
Modus operandi:
a. Powering the system.
b. If you want to use a radio product, refer to the wireless setup instructions, part "6. Peering".
c. Turn ON the switch 1.
d. Start the stoppers learning by pressing of BP Prog.
The system closes in slow speed. Then opens and closes in slow speed.
Finally, it performs an opening and closing cycle.
When the door is closed, the system is operational.
Note: if, after carrying out the learning cycles, the door is open instead of close, turn ON the switch
2 and do another learning.
Switch
Pushbutton BP Prog
LED
