13
Preparation
Wear Safety Gear
Always wear proper protective gear such as: approved safety helmet, elbow
pads and knees, long sleeved shirt and pants, gloves, and lace up shoes with
rubber soles.
Check the Hardware
Wheels: Inspect the wheels for excess wear and replace if necessary.
Battery: Always make sure the power is in the “off” position whenever the
skateboard is not in use. Never store the product in freezing or below
freezing temperatures. Those low temperatures will permanently damage the
battery.
Remote Controller: Check if the remote needs charging.
Code-matching for initial use
The skateboard is controlled by remote control, which is wireless connected
to the skateboard. At the initial user of the skateboard, code-matching
between remote controller and skateboard need to be completed. The
connection will be automatically completed after initial code-matching. New
code-match need to be executed when new remote controller or new
skateboard is used. .
CODE matching:
Power off both skateboard and remote controller, press ON-OFF switch both
for 5 seconds in the meantime. Beep of the remote controller after the 5
seconds indicates the start of code-matching, and another beep later for
successful code-matching. Restart remote controller and skateboard and
play.
U
s
e
r
’
s
M
anua
l
E
N
