MM438
7
EN
General safety
• Do not cover, restrict air inlet/out or
use to dry clothes.
• Carefully use when children, old
man, disabled man inside solely. No
use when no supervision
• Only use in the upright position on a
flat level surface.
• The surface of this fan heater is not
closely supervise any children and
pets in using.
• Do not use fan heater near flam-
mable or heat sensitive items.
• Do not position in point of or under
power sockets, shelving or other
obstructions to airflow.
Electrical Safety
• For indoor use only.
• Switch off and unplug when not
in use
• Do not full the heater along the cord
or use if damaged
• Do not use heater in humid or wet
environments
• If the supply cord is damaged. It
must be replaced by an electrician
or similarly qualified person to avoid
hazard.
To Use
Turn the heater to the “off” position before
plugging in. The operating temperature is
selected by a combination of the heater
switch and thermostat.
The hottest setting will be when the heater
switch is in II position and the thermostat
is turned to “maximum”.
To determine the correct working
temperature for your conditions, turn
the heater to “II” and the thermostat to
“maximum” when the room has reached
the required temperature turn the
thermostat slowly to the left until the tem
perature is off.
The temperature will now be kept con
stant. If you want to lower the operating
temperature select “I”
position of the heater and repeat the
above procedure. The heater is fitted with
an automatic cutout in the event
that it overheats. If is this activates, turn the
heater to the off position and unplug.