MM337
PL
8
S
S
t
t
a
a
r
r
t
t
U
U
s
s
e
e
1. Charge built-in lithium battery
In power-off state, when the camera is connected with computer, charging begins. At this time, the charger indicator lights
and it turns off when charged full. Generally, it costs 2-4 hours to charge full.
2. Use memory card
1. Follow the instructions carved by slot of the memory card, it is to insert FT card into the card slot till entirely inserted.
2. To take the FT card out, after gently pressing the end of the memory card inwards, the card will reject out.
Note: The camera is not equipped with a built-in memory, and thus a memory card is required.
3. Power On/Off:
3.1 Power-on: If to press and hold POWER key for 3 seconds, the screen starts up and the camera enters startup state.
3.2 Power-off: In idle state of the camera, if to click POWER key, the camera turns off.
Automatic power-off: When idle time set for the camera reaches, it automatically turns off to save power. The default time
of the system automatic power-off is 5 minutes;
3.3 Power-off due to low battery: In case of extremely low battery, the icon “ ”appears on the LCD screen. Please timely
charge the battery. When the icon turns red and flashes, the camera will automatically power off.
4. Functional mode switchover
The camera is equipped with three modes: capture, video and replay mode. After power-on, the modes can be switched over
with MODE switch.
Capture mode: Take pictures.
Video mode: Record video and driving (
5min, 3min and 1min).
Replay mode: Picture and video file playback.
USB Cable
Charger indicator
lights
