Manta MES001K, User Manual

Page: 13 / 44

MES001K – EN
11
Please read and understand these instructions and the OPERATING PROCEDURES
section, prior to starting or riding your scooter!
Assembly
1. Carefully remove the scooter from the box.
2. Locate the enclosed front when and attach it to the front fork of the scooter. See Fig. 1.
3. Secure the front wheel using the enclosed tools to tighten the front wheel nut/bolt. See
Fig. 2.
4. To unfold the scooter, loosen the handlebar folding clamp located at the base of the
handlebars. Fig. 3
5. Fully extend the handlebars to their upright position, and then tighten the clamp
securely. Fig. 4
6. Attach Throttle and Brake Handle Grips by inserting the handle grips into the handlebar
posts until the gold snap pin clicks into place. Fig. 5
7. Raise the T-handlebar to the desired position until the gold snap pin locks into place.
Tighten the clamp to secure the handlebar in place. Fig. 6
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6