USer’S ManUal
GK-500
User’s Manual
Introduction
MANTA series, Applying A new way to present music, Cre
-
ating A new scene which combining with music and art.
Showing the beauty of music & art though inspiration
comes from classic 8 fashion.
MANTA series Using antimagnetic MDF which is most ef
-
fective in preventing trembling and harmonic inside the body.
Using PVC material in the whole system, with labyrinthed
design of the body. According to the rules of the acoustic,
increasing the hardness of the speaker, at the same time,
reducing harmonic of the body. Gaining clear & perfect ef
-
fect of Replaying.
Connections
1. Turn off the main power of the amplifier.
2. Peel off the insulated ends of the speaker cable (about
10mm) carefully .
3. Screw down the ends of the wire .
4. Rotate the connection terminal anticlockwise to make
the wire go through the hole easily .
5. Rotate the connection terminal clockwise to make sure
that the connection made securely.
NOTICE
: Please use the accessory connection termi
-
nal cable of the speaker .The positive polarity (red+) of the
speaker should be connected to positive (red+) of the ampli
-
fier ; the negative polarity of the speaker (black-) should be
connected to the negative (black-) of the amplifier. Check the
wire to make sure that the ends do not touch the cabinet and
the positive and negative polarities do not get together .
Methods of connecting
Connect R (Right) from the SW (Subwoofer) to R front
speaker. Red to Red, Black to Black, In the same way con
-
nect L from SW to L front speaker. Center speaker from SW
to C center speaker. SR from SW to SR surround speaker,
SL from SL to SL surround speaker.
Placement
These speakers should be placed symmetrically in front
of the listening position to form an isosceles triangle be
-
tween the listener. Be sure to maintain a space above 1.5m
between the left and right speakers and a space above
2.5m to the listener to get a good stereo effect .Place the
speakers in a horizontal , strong and shockfree Place . It is
advisable to keep a distance above 20cm between MANTA
and TV set .
Maintenance
1. Please clean with vacuum dust collector or a piece of
soft and dry cloth;
2. Do not use chemical solvent like petrol to clean this
speaker, or it may damage the surface;
3. Try not to work for long hours in full-loaded situation
if not necessary .
4. Adjust the volume to the minimum position before you
turn on/off the unit to avoid impact to the speaker .
5. Do not expose it in direct sunshine or in the rain.
Specification
Front:
Drivers:
1” + 5.25”x2
Impedance:
6 ohms
Loading power:
180 watts
Frequency:
40Hz – 20kHz
Surround:
Drivers:
0.75” + 4”
Impedance:
8 ohms
Loading power:
70 watts
Frequency:
62Hz – 20kHz
Center:
Drivers:
0.75” + 4”x2
Impedance:
6 ohms
Loading power:
120 watts
Frequency:
62Hz – 20kHz
