USER’S MANUAL
40
None Subwoofer is off. Bass from center and surround
channels is redirected to the left and right channels. If
the content contains a discrete subwoofer channel, it is
discarded.
Present Subwoofer is on. Bass from center and surround
channels is redirected to subwoofer.
If the content contains a discrete subwoofer channel, it is
also sent to the subwoofer.
Note:
Bass Management is not available for MP3 or WMA
bitstream ; therefore, it will be disabled during the playback
of those streams.
Test Tones
Selecting the Test Tone setting allows the user to test the
player’s audio output on each speaker. When you select
channel, a short burst of pink noise will be sent to corre
-
sponding channel
Center Delay
Selecting the Center Delay setting allows the user to en
-
able/disable the center output delay.
Surr. Delay
Selecting the Surr. Delay setting allows the user to enable/
disable the center output delay.
Digital output
Selecting the Digital Output setting allows the user to
adjust the audio output on S/PDIF ports to work in harmony
with the audio equipment (e.g. receiver, speakers) connected
to the player.
Off Digital audio output is disabled.
PCM Select this option when you are going to use stereo
signals (2 channels). You should
combine this option with the option „Lower sampling rate,”
which we explain further on
All If you select this option the player will use the DVD’s
original audio track. Use this option when you want to use
the Dolby Digital AC3 signals through the optical or coaxial
audio output.
Down Sampling
Use the down sampling option when you have selected
the “PCM” option in the type of digital audio output:
- ON: Use this option to lower the audio sampling rate.
- OFF: Use this option to deactivate the lowering of the
audio sampling rate.
Note: A certain sampling rate is used to record disks
(measured in kHz); the higher this sampling rate, the better
the sound quality. If you turn it off, make sure that the amplifier
that you are using is compatible with 96kHz digital signals.
Rating setup
Select Rating in the setup menu, and display the Rating
submenu:
Note: Not all DVDs support ratings.
Parental Control
Selecting a Rating allows the user to set the parental
control feature of the player
Select Parental Control, and press ENTER to change
the different mode.
Note: Unlock the password before setting Parental
Control
Set Password
Use the 0-9 keys to input four digits (password), then
press ENTER to confirm.
Note: If you forget your password, please use the universal
password 8888 to unlock.
Misc setup
Select MISC in the setup menu, and display the
submenu:
Reset setup data to factory default and re-load disc
USB Port
Summary of Contents for Emperor Black 2 DVD050
Page 101: ...101 NOTE ...
Page 102: ...102 NOTE ...
