USER’S MANUAL
33
output, you must set the DVD player’s “PREFERENCES
PAGE”/ “VIDEO OUTPUT” setting to S-VIDEO.
Turn On your DVD
Player
Press the Power button on the player or the remote con
-
troller, and “Read” appears on the TV screen. If there hasn’t
a disc in the DVD player, “No disc” will be displayed on both
the screen and the VFD.
Place a disc into the
Tray
Press the Open/Close button on the remote controller
or the front of the DVD player, and “Open” appears on the
screen. Then place a disc gently into the tray with the disc’s
label facing up (double-sided discs have content on both
sides, so you can place either side up), and press the Open/
Close button again to close the disc tray, “Close” appears
and the player starts to read. Then the disc starts playing
automatically. (Note: Of some certain type discs, after read
-
ing out the type, the Play or Enter button should be pressed
to start playing.)
Playing Discs
The contents of each disc menu vary according to how
the disc was authored and what features are included. The
disc menu will be turned on for you to select, when Menu
button pressed. Also play and pause can be switched with
the Play/Pause button on the remote. Moreover, such as
menu play, title play, sequence play etc., these different play
modes are offered.
Menu Play (compatible with DVD,
VCD)
1. Press Menu Button
– TV screen displays the DVD Root Menu when a DVD
disc is loaded.
– When a SVCD or is loaded, SVCD menu will be dis
-
played on the screen (when PBC is off) (At this moment,
press PBC button once to display current PBC state).
– PBC is initialized on when a SVCD disc is loaded.
2. When a DVD disc is loaded, you can press Arrow but
-
tons to highlight the menu item you want to choose;
As SVCD, you can press numeric buttons to select a
track to play.
3. Press Enter or Play button, you can begin play with
the highlighted.
4. Return when playing: When a DVD disc is playing, press
Menu/PBC button, and you can return to Root Menu;
As SVCD and PBC is on, press Menu/PBC button, you
can return to the menu.
5. Stop
– When you press Stop button for the first time, the player
turns into quasi stop state. At the same time the OSD
appears “Quasi Stop”. To begin the title over, press
Stop twice.
– In quasi stop state, the player remembers where you
stopped, when you start playing the disc again, the
DVD player picked up where you left off.
– In stop state, when you press Play, the player enters
sequence playback mode.
– For the disc protection, before you press Open/Close
button to eject the disc tray when playing, please press
Stop button at first. After taking out the disc, press Open/
Close again to close the tray.
– If you’re not going to use the DVD player for a long time,
be sure to remove the electronic plug.
Title Play (compatible with DVD
discs only)
1. During DVD playback, press Title/Menu button to display
the DVD title content.
2. Press the Arrow buttons to highlight the title you want to
choose, and press Enter; Also you can press numeric
buttons to choose.
3. The DVD player begins with the chapter 1 of the cho
-
sen title.
Sequence Play (compatible with
DVD, VCD, JPEG discs)
1. When a SVCD disc is loaded and PBC is on, once PBC
button pressed, PBC switches off. Then the player can
play in sequence playback mode; when PBC button
pressed twice, PBC switches on.
2. Except for SVCD discs, in the stop state, when press
Play button, the player then enters sequence playback
mode. This feature is effective to all the compatible
discs.
Summary of Contents for Emperor Black 2 DVD050
Page 101: ...101 NOTE ...
Page 102: ...102 NOTE ...
