USER’S MANUAL
32
jack or Optical Output jack. (The default set is SPDIF/PCM
for the HDMI audio output )
KEY
Use the Up and Down arrow button to move the scroll
and adjust the key.
GM5
GM5 audio effect function could process 2CH au-
1.
dio source into 5CH sound. The different modes are
achieved by different DSP operating method, and the
effects will be different, too.
GM5 can support CDDA/MP3/VCD/AC3 2CH audio
2.
source.
There are extended items of GM5 function: SONG/
−
CINEMA/OFF
GM5 will be unable when it is set to OFF.
−
When it is set to SONG or CINEMA, the corresponding
−
audio effect will be achieved by GM5 function.
VIDEO SETUP
BRIGHTNESS
Use the Up and Down arrow button to move the scroll
and adjust the brightness.
CONTRAST
Use the Up and Down arrow button to move the scroll
and adjust the contrast.
HUE
Use the Up and Down arrow button to move the scroll
and adjust the hue.
SATURATION
Use the Up and Down arrow button to move the scroll
and adjust the saturation.
SHARPNESS
Use the Up and Down arrow button to move the scroll
and adjust the sharpness.
Highlight the FONT COLOR option
, and press
the Arrow buttons to choose color of title you prefer. Press
ENTER button to confirm.
Highlight the BACKGROUD COLOR option
, and
press the Arrow buttons to choose back color of title you
prefer. Press ENTER button to confirm.
Highlight theSUB POSITION option
, and press
the Arrow buttons to choose position color of title you prefer.
Press ENTER button to confirm.
SPEAKER SETUP
DOWNMIX
Use the Up and Down arrow button to move the scroll
and adjust the saturation.
– LT / RT: Choose this setting, it will be sound like in a
movie theatre if the original movie the disc was recorded from
was encoded in the Pro Logic Dolby Digital format.
– STEREO: when 2-channel sound playing, stereo signal
will be output.
– VSS: Choose this setting, when a disc recorded with
5.1-channel sound format playing, the
fictitious surround soundtracks effect will be heard from
the main soundtrack.
– 5.1CH:Choose this setting to output the 5.1-channel
sound.
SUBWOOFER
There are two settings in this option: OFF / ON. When
ON is chosen, the player will auto detect the subwoofer input
then output it. When OFF is chosen and the subwoofer input
will not be output
CENTER DELAY
You can adjust center delay in this option
REAR DELAY
You can adjust rear delay in this option.
FRONT
Settings of the front audio channels.
CENTER
Settings of the center audio channel.
REAR
Settings of the rear audio channels.
DIGITAL SETUP
OP MODE
– LINE OUT: Choose this setting to line out the input
signal. It will be more suitable for playing in the night time,
for the output volume is low.
– RF REMOD: It will be more suitable to choose this
setting for playing in the day time, for the output volume
is high.
DYNAMIC RANGE
: When “LINE OUT” is selected,
choose this setting to adjust the line out ratio and get different
effect. If adjusting to FULL, the audio signal peak value will
be the minimum; while adjusting to OFF, maximum.
NOTE:
This option will be validated when the DOWn
-
MIX OFF.
DUAL MONO
(LEFT + RIGHT)
Choose this option to setup the L and R mono output
mode; There are four modes in this option: STEREO, MONO
L, MONO R, and MIX MONO.
