USER ManUal
8
Pc connection
1. System Requirement;
2. USB port;
3. Windows98/ME/2000/XP & Vista;
4. DirectX version 7.0 and later.
To connect the wheel, plug the wheel’s USB connector
into a spare USB port on your computer, (Note: To use a
USB controller, you must be running windows 98/98SE/
ME/2000/ XP/ Vista operating systems)
Installation
1. Enter into Windows
2. Insert the supplied Driver CD into your PC CD Rom
3. Double click the SETUP icon
4. Install the driver ‘LS-USBmX1/2/3’ following system
prompts
5. Connect the Steering Wheel to a USB Port on the
PC
6. Select ‘Game Controllers’ in the Control Panel to cali
-
brate the steering wheel properties
Calibrate the wheel as described in the calibration section
of the game controller window. The USB driver will only have
to be installed once, after this has been done whenever you
connect the wheel to your USB port the “LS-USBmX1/2/3”
will appear within the “Gaming Options” window. To ensure
the wheel works correctly please re-calibrate the wheel
before use.
When you have finished testing, quit by clicking on OK
in the Test window, and OK in the General window. Finally,
close the Control Panel window. Now its time to load your
favorite game and start playing! Note the actual controls
for the fire buttons, throttle and brake pedals are set within
each individual game. Check your game documentation
for further details.
sensitivity
adjustment
1. The wheel has three settings of steering sensitivity to
suit your driving games – High, Middle & Low.
2. To change between these three levels of sensitivity,
3. Press and Hold the Select and Start buttons for 3
seconds, a green LED will switch ON;
4. Press the Select button to enter the sensitivity
adjustment.
5. Press the Select button again to select between the
following:
Middle (Green-LED illuminates) – Highest (Green-LED
flashing quickly) – Lowest (Green-LED flashing slowly)
6. Press the UP button on the D-pad to exit.
button relocation
The Steering Wheel incorporates a very useful feature
called Button Relocation to re-map any control button to
the most convenient and useful button configuration for
the user.
1. Press and hold the program button (or start and select)
for 3 seconds till the green led illuminates
2. Press the button that you wish to relocate the function
to, the LED starts to flash.
3. Press the button with the function you wish to be relo
-
cated, the LED turns OFF, the relocation is complete.
4. Repeat the above steps to relocate further control
buttons.
Note:
1. Once power off, all the program setting will be
cleared.
2. Please ensure that Button Relocations are deleted be
-
fore changing to a different driving game, otherwise the
controls may not match the new game being played)
to clear a button relocation
(remap)
1. Press and hold the program button (or start and select)
for 3 seconds till the green led illuminates
2. Press the desired button to delete the Button Reloca
-
tion, the LED starts to flash.
3. Re-press the button, the LED is OFF, deletion is
complete.
4. Repeat the above steps to clear any other Button
Relocations
