CK-501
44
EN
GAS BURNERS
• Do not put deformed or unstable dishes on the grid as they may
fall and flood the burners.
• Do not remove the grids to put the dishes directly on the burners.
• Do not put empty dishes over ignited burners.
• Before taking dishes off the burners, reduce the flame or put it out.
• The burners should be kept clean, as the dirt has a negative impact
on their operation.
• The flow of gas in the individual burners is opened and closed
using the gas knobs.
• Before igniting a burner, make sure the knob you want to turn
matches the right burner that you want to use. The assignment of
the knobs to the burners is presented visually over each knob.
Selecting the flame
• The flame should not reach beyond the bottom of the dish, but
cover two-thirds of its surface. Such use will allow to save gas and
the flame will not stain dishes.
• The size of the flame depends on the position of the knob. Full
flame should be used until the food boils, and cooking further is
done best using a smaller, economy flame.
• The size of the flame should be adjusted only between position
and
Igniting and putting out the burners
IGNITING
• press the knob of the selected burner until you feel its resistance,
turn it anti-clockwise and put flame or spark to the selected burner,
• after igniting the gas, release the ignition button,
• set the size of the flame.
