HYPER150 EC
EC Inline Axial Duct Fan with App Control
The plastic spigots have been designed for easy mounting onto a fl at solid surface such as the top plate of a wall partition, or ceiling joist, as found in a
roof cavity or, alternatively, to avoid possible resonance effects the motor can be suspended from the rafters.
BEFORE INSTALLING THE EC INLINE AXIAL DUCT FAN, MAKE SURE YOU HAVE TURNED OFF THE MAIN
ELECTRICITY SUPPLY. DO NOT TURN IT BACK ON UNTIL THE EC INLINE AXIAL DUCT FAN IS FULLY
INSTALLED AND READY TO USE.
ALL ELECTRICAL WORK MUST BE CARRIED OUT BY A REGISTERED ELECTRICIAN IN ACCORDANCE
WITH THE LATEST WIRING RULES AS/NZS3000.
INSTALLATION
Flexible duct
Internal grille
External grille
EC Inline axial duct fan
screwed to the joist
TYPICAL INSTALLATION
PUB1646 2011
Specifi cations are subject to change without notice
Manrose is proudly distributed by Simx Limited
PO Box 14 347, Panmure, Auckland, NZ. Technical Support (09) 259 1662
e: [email protected] | www.simx.co.nz | www.manrose.com.au
