background image

One Year Limited Warranty:  

Mann Lake warrants this product, to original purchaser, for one year from purchase date to 

be free of defects in materials and workmanship.  This warranty is the only written or express warranty given by Mann Lake  

ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS ARE HEREBY EXCLUDED.  Mann Lake’s obligation under 

this warranty is limited to repair or replacement of the product, at its option.  IN NO CASE SHALL MANN LAKE BE LIABLE FOR 

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM BREACH OF THIS WARRANTY.

Now that the straws are filled, pick up the manifold and hold 

the ends of the straws in the sealer. Seal as close to the honey 

as you can. Press the sealer down and hold it until it cycles (you 

can hear it), lift up just a little and push it down again and hold 

it for several seconds after it cycles off. This gives the seal time 

to cool, making it much more reliable.

Check and see that the seal is viable. Now push the straws into 

the sealer until the male adapters are just outside the sealing 

area. Repeat the sealing procedure as above on the base of 

the straw. Remember that in some instances there is honey 

between the layers of the straw. It might take a little more 

time, and you will smell burnt honey that gets on the sealer.  

You can seal above the honey level and have a small air pocket 

in the straw if you so choose. 

While the sealer is closed and after the seals have cooled, 

pull the manifold away, and the straws will come off of the 

manifold.

You now have 9 honey straws. Place the sealed straws in a sink 

or dish pan of warm water. This will clean off any honey on the 

outside of the straw. Once you are finished filling all that you 

want, take the straws from the sink/pan, dry them and trim the 

ends.

We produced straws that were around 6” in length after being 

trimmed. These straws contained approximately 4.8 grams 

of honey. At this rate you would produce approximately 100 

straws per pound of honey. 

PARTS IN THE BOX

1

CN-400  1 GALLON PAIL W/LID AND FITTING

1

HH-101

COMPLETE MANIFOLD W/FEET

1

HH-102

HOSE & CLAMP KIT

1

HH-103

½” EMT L BRACKET W/HARDWARE

1

CN-405

500 CNT JUMBO STRAWS

1

HD-304

16” HEAT SEALER

Reviews: