Section 4
Maintenance
4-1
Section 4
Maintenance
General
You are responsible for maintaining the dispenser in
accordance with the instructions in this manual.
WARNING
If you do not understand the procedures or the
safety precautions that must be followed, call your
local Manitowoc service representative to perform
the maintenance procedures for you.
We recommend that you perform the following
maintenance procedures every six months to ensure
reliable, trouble-free operation.
Dispenser Inspection
•
Check all water fittings and lines for leaks.
•
Verify drains are unobstructed.
Exterior Cleaning
•
Clean the area around the dispenser as often as
necessary to maintain cleanliness and efficient
operation.
•
Sponge any dust and dirt off the outside of the
dispenser with mild soap and water. Wipe dry
with a clean, soft cloth.
Cleaning and Sanitizing
When cleaning or sanitizing the dispenser, pay close
attention to the safety information below.
WARNING
Before removing any parts, unplug or disconnect
the electric power to the dispenser at the electric
service switch box.
WARNING
Do not mix Ice Machine Cleaner and Sanitizer
solutions together. It is a violation of Federal law to
use these solutions in a manner inconsistent with
their labeling.
WARNING
Wear rubber gloves and safety goggles (and/or face
shield) when handling Ice Machine Cleaner or
Sanitizer.
CAUTION
Do not use metal scrapers or abrasives on the bin
liner or plastic parts. The smooth surfaces will be
damaged.
CAUTION
Use only Manitowoc approved Ice Machine
Cleaner (part number 94-0546-3) and Sanitizer
(part number 94-0565-3). It is a violation of Federal
law to use these solutions in a manner inconsistent
with their labeling. Read and understand all labels
printed on bottles before use.
