K00400 Dispense Chute Conversion Kit Bucket Fill to Cup Fill
Manitowoc Foodservice Group, 2110 S. 26th St., P.O. Box 1720, Manitowoc, WI 54221-1720, Tel: 920-682-0161, www.manitowocfsg.com
7. Put the new ice chute into place by lifting the door lock and
door lock assembly. Rotate the chute counter clockwise in
an up and away from you motion, but
do not
snap the
bracket pins into place. Rest the chute on top of the pins.
This is so you can angle the longer chute through the chute
opening as you put the front panel back on to the
dispenser.
8. Place the bottom edge of the front panel on the lower
brackets of the dispenser so that the front panel can be
put back into position with a “scissor” like motion while
simultaneously angling the ice chute through the front
panel opening.
9. Return the front panel to its "in place" position and slide
the chute through the opening, but
do not
push the front
panel all the way back as shown below.
10. Working from the front opening you can now align the ice
chute with the bracket pins and snap into place.
11. With the cup dispense ice chute now snapped into the
bracket pins, replace the bracket clip across the front of
the chute bracket by reaching through the front panel
opening and snap into place.
12. With the bracket clip in place the cup dispense ice chute
is now secured in place. The front panel can now be
pushed all the way into place.
13. Once the front panel is pushed all the way back into it’s
final position, replace the two screws on both sides of
the ice chute.
14. Plug unit back in for operation.
15. Test the operation of the dispenser by pushing the ice
chute to dispense ice.
Door Lock
Ice Chute
Bracket Pins
Front Panel
Ice Chute
Opening
Ice Chute Opening
Bracket Pins
Front
Panel
Bracket
Clip
Front Panel
Ice Chute Opening
