K00119 BIN DEFLECTOR KIT
Installation Instructions
NOTE: This kit will convert a C-900/C-950 bin to a C-970 bin or a C-910/C-960 bin to a C-980 bin. This kit is also used
on Manitowoc F-style bins, when stacking Q-1300/1600/1800 ice machines.
1.
Remove the gasket material along the front and both sides of the bin.
2.
Remove the #8 screws holding the current ice deflector. Save these screws – a total of six from a C-900/C-910; a total
of eight from a C-950/C-960.
3.
Remove the ice deflector.
4.
Place new ice deflector in position and use the slots in the side flanges as guidance to drill four 1/8” holes.
5.
Fasten the ice deflector using the screws removed in step 2 for the front and the four supplied screws, two each side,
for the side flanges. NOTE: C-900/C-910 only – use additional two screws, shipped with the new ice deflector, on
the front.
6.
Install the new gasket material along the front and sides of the bin.
Manitowoc Ice, Inc.
2110 South 26
th
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8010253
Web Site - www.manitowocice.com Rev. 06/13/03
Ice Machine Back
Supplied Screws
Drill 1/8” Holes
Both Sides
(See Step 4)
New Deflector
Supplied Screws
24” Gasket
Both Sides
48” Gasket
