background image

Part Number: 000013325 Rev 01  4/16 

35

Section 3 

Operation

Ice Bin Level Sensor

Ice bin sensor is an optional accessory that allows the ice 
level in the bin to be set to one of three different levels. 
The bin level can be set seasonally to match usage, which 
results in lower energy costs and fresher ice.

1.  In the Energy Saver menu, ensure that Ice Program is 

highlighted and press checkmark.

2.  Select Bin Level and press checkmark.

3.  Select Settings and press checkmark.

4.  On this screen you can choose to set the ice level to 

low, medium or high by highlighting your choice and 
pressing the Checkmark. Selecting one will deselect the 
other.

NOTE: On ice beverage models you must choose low for 
the control to function. The ice beverage sensor has one 
thermistor, while the bin level sensor has three.

5.  Select - Exit, Save changes, Yes and then Done.

When the check reflects your preference, use the Down to 
navigate to Exit and press the Checkmark. The display will 
return to the Set-up menu.

Water Miser

Water Miser is a feature that reduces water usage by 
eliminating flush cycles. Enabling this feature is only 
recommended for systems with de-ionized or reverse 
osmosis filtering. 

1.  From the Energy Saver menu, use the Down arrow to 

highlight Water Miser. 

2.  Press the Checkmark. On this screen, you can choose 

to turn the Water Miser ON or OFF by highlighting your 
choice and pressing the Checkmark. Selecting one will 
deselect the other.

3.  Press the Left arrow to return to previous screens and 

to the Energy Saver menu.

Statistics

1.  From the Energy Saver menu, use the Down arrow to 

highlight Statistics.

2.  Press the Checkmark. Choose to view ice production, 

potable water usage or energy usage statistics by 
highlighting your choice and pressing the Checkmark.

3.  Press the Left arrow to return to previous screens and 

to the Energy Saver menu.

 Factory  Defaults

The entire setup can be reset to the factory defaults.

1.  From the Set-Up menu, use the Down arrow to 

highlight Fact Default.

2.  Press the Checkmark two times to reset the ice 

machine. The display will return to the Set-Up menu.

Summary of Contents for Indigo I0300

















































Reviews: