Installation Instructions
Guardian GSI200
5
ICE SENTRY
SACHET REPLACEMENT
FREQUENCY
Ice Sentry
Sachet packet(s) require replacement
every thirty (30) days or whenever they come in direct
contact with water. Refer to chart below for
requirements.
Ice Machine Model
Q - IB - J - B
200 Gram
Ice Sentry
Sachet
(K00206)
200 280 320 370 420 450
Use 1
600 800 1000
1300 1600 1800
Use 1 or 2*
*Although one Ice Sentry
sachet is recommended,
extreme conditions may necessitate using two sachet
packets.
A green light will blink once every 7 seconds for 30
days. After thirty (30) days the green light de-
energizes and a red light energizes and blinks every 4
seconds. The red light indicates that the Ice Sentry
sachet packet(s) are due for replacement.
The timer receives power from two (2) AA batteries.
Battery life is approximately three (3) years.
A reset button is located on the rear of the timer
housing. After replacing the Ice Sentry
sachet
packet(s), press and hold the button for 3 seconds to
reset the 30-day timer, then release the button.
Ice Sentry
Sachet replacement packets are available
through your local Manitowoc ice machine dealer.
ICE SENTRY
SACHET REPLACEMENT
PROCEDURE
The size of the refill Ice Sentry
sachet required is
based on the amount of ice produced and depends
upon the actual conditions of use. Most applications
require one 200-gram Ice Sentry
sachet; extreme
conditions may necessitate two Ice Sentry
sachets.
1. Remove front panel from ice machine.
2. Remove and discard spent Ice Sentry
sachet
packets.
3. Remove Ice Sentry
sachet from foil package and
install into holder. Removing the foil packet
allows the moisture in the air to activate the packet
contents.
4. A reset button is located on the rear of the timer
housing. After replacing the sachet packet(s),
press and hold the button for 3 seconds to reset the
30-day timer, then release the button. The green
light will blink every 7 seconds for another 30 day
period.
5. Reinstall ice machine front panel.
6. Discard used Ice Sentry
sachet in trash.
CLEAN UP PROCEDURE FOR DAMAGED
SACHET PACKET
1. Remove all ice from bin/dispenser and discard.
2. Initiate a cleaning and sanitizing sequence on the
ice machine (refer to Ice Machine Installation, Use
and Care Manual).
3. Clean the bin/dispenser. Flush the drain
thoroughly to prevent future drain blockage.
4. Sanitize
the
bin/dispenser.
5. Install a replacement sachet packet and reinstall all
covers.
