Manitowoc GROVE GMK5150L, Operating Manual

Page: 643 / 1040

Crane operation
11.4 Operation of the rated capacity limiter
Operating manual 3 302 709 en 11 - 53
GMK5150L
1
2
.0
1.
201
8
On the
CCS
display After confirming a permissible rigging mode, the
Start menu
opens
automatically.
Slewing range type Standard
If the
MAXbase
slewing range type has been entered;
à
p. 11 - 55.
The RCL display differs according to the confirmed slewing range.
360° slewing range
The diagram ( 7 ) covers the entire width.
The height of the diagram corresponds to
the maximum permissible working radius (
1 ),
for example, 30 m (100 ft).
The current position of the boom head is
shown using the symbol (
4 ) and defined by
two displays.
The shutdown range for the maximum
working radius (
2 ) is shown in colour and –
if active – the shutdown range for the
minimum working radius (
6 ) is displayed.
– When telescoping or derricking
The displays ( 2 ) move up and down to show
the current working radius, e.g. 25 m (20 ft).
In a shutdown range ( 1 ) the movement
towards the shutdown limit is continually
reduced until reaching a standstill.
The corresponding display (
3 ) shows the
current speed reduction, e.g. for lowering
the boom.
s
3 Current working radius, e.g. 6 m (20 ft)
5 Current slewing angle, for e30°
4 Green: 26% to 100%
5 Yellow: 11% to 25%
6 Red: 0% to 10%