Manitowoc Grove GMK 4100L-1, Maintenance Manual

Page: 153 / 356

Maintenance work on the carrier
7.9 Axle lines
2
5
.1
1.
201
6
Maintenance manual 3 302 364 en 7 - 65
GMK 4100L-1
7.9.7
Lubricating longitudinal Cardan shafts
H
Check all Cardan shafts to see if they have grease nipples.
Cardan shafts with grease nipples must be serviced, Cardan shafts without
grease nipples are maintenance-free.
Grease, spare
parts, tools
– Grease gun from the tool set.
Prerequisites – The truck crane must be raised on outriggers or parked over an
inspection pit.
– The engine must be switched off and secured against unauthorised use;
à
p. 2 - 3.
Lubricating
•
The Cardan shaft ( 2 ) is fitted only to the
8 x 8 x 8 drive.
•
Check which Cardan shafts ( 1 ) and ( 2 ) have
lubricating nipples ( 3 ).
•
Clean the grease nipples ( 3 ).
•
Inject grease into the grease nipples until
grease escapes from the bearing points.
Do not inject grease with excessive force,
otherwise the lip seals may be damaged.
•
Remove the excess grease.
M 6
Lubricating
grease
Designation
to DIN 51502
Specification
classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369