15
Starting the AR-Pre
•
Insert incoming water
line into the inlet port of
the AR-Pre head.
•
Install AR-Pre cartridge,
K00337. The label will
be facing front.
•
Turn on incoming water
supply. Check for leaks.
NOTE:
Flush cartridge for 2 minutes to
remove trapped air and carbon fines
Setting the
pressure gauge
•
Rotate the red follower
needle clockwise until
the follower contacts
the black pressure
needle on the low side.
The red follower needle
will now record the
lowest water flow
pressure when the filter
system is being used.
