Manitou MC 25-2 D K ST3A S1, Operator'S Manual

Page: 99 / 102

4-5
INTRODUCTION
Your lift truck must be used with interchangeable equipment. These items are called: ATTACHMENTS.
A wide range of attachments is available, guaranteed by MANITOU and designed to fit your lift truck perfectly.
IMPORTANT
Only attachments approved by MANITOU are to be used on our lift trucks
(see: 4 - ADAPTABLE ATTACHMENTS IN OPTION ON THE RANGE: TECHNICAL SPECIFICATIONS OF ATTACHMENTS).
The manufacturer shall not be liable for any modification or adaptation of an attachment made without its knowledge.
The attachments are delivered with a load chart concerning your lift truck. The operator's manual and the load chart should
be kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions contained
on this notice.
IMPORTANT
Maximum loads are defined by the capacity of a lift truck taking account of the attachment’s mass and center of gravity.
In the event of the attachment having less capacity than the lift truck, never exceed this limit.
All attachments with a suspended load (winch, crane jib, crane jib with winch, hook, etc.) MUST be used with a lift truck equipped with a hydraulic movement cut-out
device. In this case, the movement cut-out must be switched on and the transverse attitude perfectly horizontal.
Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional
solutions exist, consult your dealer.
647635 (12/12/2017) MC 18-2 / MC 18-4 ST3A S1
www. duma -rent.com