Manitou MC 25-2 D K ST3A S1, Operator'S Manual

Page: 68 / 102

 10H - DAILY MAINTENANCE OR EVERY 10 HOURS OF SERVICE
CHECK Lift truck environment
IMPORTANT
Follow the operator instructions ( 1 - OPERATING AND SAFETY INSTRUCTIONS: OPERATOR INSTRUCTIONS).
- Carry out a general inspection around the lift truck:
• Fluid leaks or stains on the ground.
• Additional objects on the lift truck and in the overhead guard or cab.
• Mounting and adjustment of lights and rear-view mirrors.
• Mounting and locking of the attachment.
• Condition of the tyres, to detect cuts, blisters, wear, etc.
- According to the conditions of use and the environment, ensure that the forklift truck is kept in a clean condition:
• Cleanliness of lights, rear-view mirrors, windscreens and driver's operating.
• Cleanliness of engine housing and interior of chassis (
OCCASIONAL MAINTENANCE) to prevent the potential
accumulations of material or leakages (e.g. straw, flour, sawdust, organic waste, etc.).
IMPORTANT
Particular attention should be paid to accumulations of flammable materials and fuel or lubricant leaks, as these significantly increase the risk of fire outbreaks.
CHECK Engine oil level
Place the lift truck on level ground with the engine stopped, and let the oil settle in
the sump.
- Open the engine cover ( 2 - DESCRIPTION: CONTROL AND COMMAND
INSTRUMENTS).
- Pull out dipstick 1.
- Clean the dipstick and check the correct level between the two notches.
- If necessary, add oil ( LUBRICANTS AND FUEL).
- Remove the cover plate 2.
- Add oil through filler port 3.
- Visually check that there is no leakage or seepage of oil in the engine.
1
3
2
3 - 12
647635 (12/12/2017) MC 18-2 / MC 18-4 ST3A S1
www. duma -rent.com