maniquick MQ 160, Operating Instruction

Page: 53 / 94

7. Changing between Celsius and Fahrenheit
This thermometer can display temperature measurements in either
Fahrenheit or Celsius. To switch the display between °C and °F, simply
turn OFF the unit, press and hold the START button for 5 seconds; after
5 seconds, the current measurement scale («°C» or «°F» icon) will be
flashing on the display .
Change the measurement scale between °C and °F by pressing the
START button . When the measurement scale has been chosen, wait for
5 seconds and the unit will automatically enter the «ready for measuring»
mode.
8. How to recall 30 readings in Memory Mode
This thermometer can recall the last 30 readings.
• Recall mode : Press the START button . to enter Recall mode
when power is off. The memory icon « M » will flash.
• Reading 1 - the last reading : Press and release the START
button to recall the last reading. Display 1 alone with memory
icon.
• Reading 30 - readings in succession: Press and release the
START button consecutively to recall the last 30 readings in
succession.
Pressing and releasing the START button after the last 30 readings
have been recalled will resume the above sequence from reading 1.
9. Error Messages
•
Measured temperature too high : Displays « H » when
measured temperature is higher than 42.2 °C (108.0 °F) in body
mode or 100 °C (212 °F) in object mode.
•
Measured temperature too low : Displays « L » when measured
temperature is lower than 34.0 °C (93.2 °F) in body mode or 0 °C
(32 °F) in object mode.
•
Ambient temperature too high : Displays « H » in conjunction
with the when ambient temperature is higher than 40.0 °C
(104.0 °F).
•
Ambient temperature too low : Display « L » in conjunction with
the when ambient temperature is lower than 16.0 °C (60.8 °F)
in body mode or lower than 5.0 °C (41.0 °F) in object mode.
•
Error function display : The system has a malfunction.