16•
MANIP LOCK IMPLEMENT
ATTACHMENT
(HYDRAULIC LOCK)
Operators manual
MANIP’ MPower
IMPORTANT
This operation
is to be carried out
by the driver
from his tractor seat –
any outside manœuvre
is forbidden.
IMPORTANT
Do not use tools
which are not
recommended by Manip.
A badly designed
implement can detach
itself and have severe
or even lethal
consequences.
Respect the safety
regulations.
17
PROCEDURE
Start the tractor.
Make sure that the locks are in unlocked position, if it is not the
case then unlock it, (See chapter. Implement detachment
page.16).
Tip the tool carrier frame at a 45°angle.
Slowly bring the tool holder under the
upper hooks of the tool.
Lock the tool.
Simultaneously press with both hands on
Both 3
rd
and 4
th
function switches
Manœuver the lever.
Towards the left to lock the tool,
Release the switches and back to neutral.
Tools with hydraulic function only
Stop the engine
Release the oil pressure. Move the lever left and right by
pressing on the 3
rd
and 4
th
function switches.
Connect the hydraulics or the MANIP Fast tool, (according to
option see page18).
Lift and dig the tool.
WARNING
Pinching and crushing risk,
a tool badly locked can come loose
Always control that the tool is locked
by pushing it against the ground.
