9
Operators manual
MANIP’ MPower
INTERDICTIONS
Never use the loader or the tool as a working plan.
Never use the loader to carry or lift people.
Never pass or stand under a lifted loader.
Never stay under a lifted loader unless the mechanical or
hydraulic shut off device is in a locked position.
Never detach the loader without a tool.
Never use the loader for anything other than transport of
materials.
Never lift a weight with the tool angle.
ADVICE
Use the strength of the engine and a slow speed to engage the
tool into the load you have to move ; the valve in a neutral
position to avoid putting the loader and the tractor under
abnormal stress that can consequently be harmful to both.
Do not insist if the load you have to lift is too heavy, release the
valve lever and start again in a rational manner.
Work according to the loader’s strength.
Never lift with the angle of the tool, the concentration of the
weight on one side can cause the bending of the arm.
Never carry a load in high position as the loader may lose its
balance.
Use and regulate the level indicator to know the position of the
tool whilst it is descending.
Tractors with a low hydraulic flow, we advise you to keep a
certain engine flow by lowering the arm or by tipping the tool,
this is to improve the filling up of the cylinders with oil and
avoid the response time.
For levelling work, tip the tool in a 45° angle so that the blade
is in contact with the ground, and not the bottom of the tool.
This will reduce the wear of the tool.
