18
System
Standby Options
→
Auto Standby
The T3•R will automatically go into standby if no buttons are pressed for 3 hours. The
length of Auto Standby can be changed or it can be disabled altogether.
Standby Options
→
Standby Mode
There are 3 standby modes: ‘Smart’ (default), ‘Sleep’ and ‘Max Energy Saver’. Depending
on the standby mode and network connectivity, there are 2 standby states:
• Sleep/Networked: Network connectivity is maintained and the T3•R wakes instantly.
• Passive: Network connectivity is not maintained and the T3•R takes 20 seconds to wake up.
When there is no network connection:
• In ‘Smart’ and ‘Max Energy Saver’ modes, the T3•R enters passive standby when
STANDBY
is pressed or there is no user interaction for the Auto Standby duration.
• In ‘Sleep’ mode, the T3•R enters sleep/networked standby when
STANDBY
is pressed
or there is no user interaction for the Auto Standby duration.
When there is a network connection:
• In ‘Smart’ mode, the T3•R enters sleep/networked standby when
STANDBY
is pressed
or there is no user interaction for the Auto Standby duration. If there is no TV signal, it
enters sleep/networked standby when there is no user interaction for 20 minutes.
• In ‘Sleep’ mode, the T3•R enters sleep/networked standby when
STANDBY
is pressed
or there is no user interaction for the Auto Standby duration.
• In ‘Max Energy Saver’ mode, the T3•R enters passive standby when
STANDBY
is
pressed or there is no user interaction for the Auto Standby duration.
Standby Options
→
Loop Out in Standby
To meet EU energy consumption requirements the T3•R’s Loop Out socket is unpowered
in standby. If you connect an aerial cable from the socket to your TV’s aerial input and want
it to work when the T3•R is in standby, turn on ‘Loop Out in Standby’. Please note that ‘Max
Energy Saver’ cannot be selected as the ‘Standby Mode’ when ‘Loop Out in Standby’ is on.
Reminder Auto Watch
See page 13.
SETTINGS (CONT’D)
