34
8.2 Picture In Picture (PIP)
1.
Press the
PIP
button to display PIP. Press the
PIP
button repeatedly to change the
size of sub-picture or to close the sub-picture. PIP function will only show another
channel from the same TP.
2.
When in PIP mode, press the
Yellow (F3)
button to swap main-picture with sub-
picture.
3.
Press the
Red
button to move the position of sub-picture.
4.
To display the service list of main-picture, press the
OK
button. To display the service
list of sub-picture, press the
Green
button.
Additional Information
A.1 Troubleshooting
Please check the receiver using the procedures described below. If you can’t
solve the problem even after following the procedures, please contact your dealer. Do
Do
not open the receiver cover. It may cause a dangerous situation.