14
LNB Type
1. Select the LNB Type. If you select User Single or
User Dual, enter LNB Local Oscillator (LO) frequency
using 0 ~ 9 buttons, and press the
button. If you
select LNB Type as 9750/10600, 9750/10750 or User
Dual, 22KHz value is fixed to auto mode. In other
cases you can select On or Off.
Switch Type (select Switch Type if used)
1. If you use a DiSEqC 1.0 switch, select DiSEqC.
Then select one of the DiSEqC inputs on the Option.
2. If you use a DiSEqC 1.1 switch, select SMATV.
Then enter a value using 0 ~ 9 buttons (950~2150)
on the Option.
Motor
1. If you use a DiSEqC 1.2 motor, select Motor.
2. Adjust position of your Motor on the Option.
DiSEqC 1.2 Options
Move West-East: Press the
◀
/
▶
button to move the motor.
Store Position: Press the
button to save the current position.
Go to Position: Press the
button to move the motor to the stored position.
Go to Reference: Press the
button to move the motor to the 0 position.
Set West Limit: Press the
button to enter the West limit.
Set East Limit: Press the
button to enter the East limit.
Enable Limit: Press the
button to change to Enable or Disable Limit.
USALS
1. If you use a USALS motor, select USALS using the
◀
/
▶
button.
2. Configure your location Longitude and Latitude and
move position of your USALS motor through the Option.