12
SWITCHING ON (continued)
Turn on your TV set and choose the HDMI input (see your
television’s manual for guidance).
Switch on the mains socket the Plaza HD•S2 is connected to.
After a few seconds, the receiver’s first Freesat installation screen
shown below will appear on the television screen:
TUNING IN
When the first installation screen is displayed, use the or
buttons to select the screen format of your television (16:9
Widescreen or the squarer 4:3 Traditional). Then press the
button to highlight the HDMI Resolution selection box, and use the
or buttons to select the correct resolution for your television.
Press
to select the “Next” button and then press
to display
the next installation screen.
HINT:
If you do not see this screen on your television, see
‘Troubleshooting’ on page 40.
