3. The drive case’s SATA cable supports 3.5-inch drives. Attach the
power and SATA cables from the drive case to the drive. The power
connector is “D”-shaped to help orient the connector correctly.
NOTE:
In order to install a 2.5-inch drive, you need a 44-pin-to-40-pin
connector adapter.
4. Carefully position the drive inside the drive case
5. Secure the drive in place using the supplied mounting screws. Use
the mounting holes on the sides or bottom, depending on the design
of the drive.
6. Slide the drive case cover back on.
The hardware installation is now
complete; the drive case is
ready to use.